A Framed Screen with Modeling Paste Tech....

Hello, Delaina here with you today....I wanted to share a little technique I tried out with modeling paste and screen...Hope you like it!!

I made this flowery frame with a piece of window screen from the hardware store and a little modeling paste and paint...Hope you will give it a try.

Supplies needed....

Small wooden frame- (painted gold here)
Window Screen (from the hardware store or Wal Mart)
Paint (I used a Gold color)
Modeling Paste and Spatula
Stencil (butterfly shape used here)
Flowers (Sept Flower Kit used here)



To make the Butterfly Image you will need the following...



Add a thick layer of the modeling paste to the screen over the top of the stencil (be sure to apply on a waterproof and clean surface)...



Remove the stencil by pulling straight up from the screen...



Remove from surface and hang until completely dry...




After the image is dry I covered the entire screen surface with gold paint...Just painting a few areas of the stenciled butterfly.
Allow to dry
Staple or glue the screen to the back of the frame and add flowers and ribbon.